1 11

Jacks Trade

Smart Wifi Switch Light Interruptor wifi 220V Alexa Compatible Google Home Intelligent Home Automation Modules

Smart Wifi Switch Light Interruptor wifi 220V Alexa Compatible Google Home Intelligent Home Automation Modules

£7.99 GBP
£15.99 GBP £7.99 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Color

SPECIFICATIONS

Brand Name: Huaruiyu

Hign-concerned Chemical: None

Origin: Mainland China

Certification: CE

Model Number: Smart Wifi Switch

Frequency: 433 MHz

Input: AC90-250V

Max Current: 10A 2200W

Frequency: RF433MHz

WIFI: 2.4G WPA/WPA2









Specifications Of The Receiver:

Input Voltage: AC 90-250V 50HZ/60HZ.


Max Current: 10A (2200W).


Wireless Standard: IEEE 802 .11 b/g/n.


RF Working Frequency: 433MHz.


Remote ON/OFF: Turn electrical devices on/off from anywhere.


App Support: Free iOS and Android mobile App, or Support third-party language control （Third-Party Voice Services: Alexa , Google Assistant , SmartThings , IFTTT , XIAODU , Tencent Xiaowei , DingDong）


Timing: Set scheduled/countdown/loop timers to turn on/off at specified time.


Share Control: Control your smart home together with your family.


Voice Control: Works perfectly withAlexa , Google Assistant , SmartThings , IFTTT , XIAODU , Tencent Xiaowei , DingDong.


Enclosure Material: Fire-retardant ABS.


Size(L/W/H): 83mm x 42mm x 26mm.


About receiver's Working Mode:

1.Momentary Mode: Press the Remote control button, the receiver's relay is ON; release button, the receiver's relay is OFF. (This working mode is not suitable for lighting, it is mainly used for special scenes)




2.Toggle Mode: Press Remote control button for 1 time, the receiver's relay is ON; press button again, the receiver's relay is OFF.




3.Latched Mode: Press Remote control button A, the receiver's relay is ON, Press the transmitter's button B, the receiver's relay is OFF.




Reset Function: After push the receiver's learning button 8 times, the receiver Clear all the remote control data in its memory.


When the red LED flashes for a few times, it indicates that the clear function is completed.


(After cleared the code in the receiver, all the remote control cannot work with the receiver.)



1.Support: Alexa, Google Assistant, SmartThings, IFTTT, Xiaodu, Tencent Xiaowei, Dingdong for voice control


2.Support multiple mobile phones, support "one-to-many" and "many-to-one" remote control


3.Device one-key sharing function, you can share multiple devices with one-click to friends for common use


4.Disconnected network can also be controlled by mobile phone, no need to worry about the Internet causing uncontrollable


5.Intelligent control can be combined with weather forecast, don't think of manual control on and off


6.Countdown function, intelligent timing switch on and off


7.Timing function, you can set the time period to repeat execution, the timing device stores the local chip, and it can be executed even if there is no network


8.Mobile APP remote control, through the Internet China can control local equipment in the United States, and real-time feedback status


9.Anti-surge protection to avoid the impact of thunderstorm on the equipment


10.There is a linkage function between the equipment and the equipment. When the A switch is turned on, the B switch can also be turned on or off by itself; no human is required


11.Smart scene mode can be set, mobile phone key mode can be executed with one key, manual key device switch can also start smart mode


12.The operation interface is simple and clear, which can be used by the elderly


13.App software supports Android and iOS systems, with simple interface, one-key switch and easy operation


14.Patented heat dissipation design, high-quality materials and accessories, long service life.



Compatible with Amazon Alexa and Google
Assistant.



Simply use your voice to control the connected devices.


To share the controlling of your devices with your family members


One person controls more than one


Multiple people control one



Timer and Countdown Setting


Control your devices at will to automatically turn on / off


A Wide range of Appliances


Alexa , turn on the living room light


OK


Hands-free Voice Control



Compatible with Alexa , Google Assistant , SmartThings , IFTTT , XIAODU , Tencent Xiaowei , DingDong , the smart switchallows you to control lights on / off with your voice


As long as the mobile phone has network information, any place can be controlled

3 kinds of control mode


Especially suitable for the elderly , nursing mothers .Pregnant women , disabled people , children , etc


Voice Control: Works perfectly withAlexa , Google Assistant , SmartThings , IFTTT , XIAODU , Tencent Xiaowei , DingDong.



Timing Function


Set the time to turn on the lightSet time to cook rice



How to install this smart switch:



You don't need to open the outer casing of this smart switch.

You can wire directly to the terminal block.

Please note: Please turn off the power before wiring.

Please connect the wires according to the following diagram.

completed, turn on the power and operate according to the status of the smart switch indicator:

1) If the red light of the smart switch flashes continuously at this time, it indicates that the smart switch has entered the state of waiting for connection to WiFi; then open the APP and follow the instructions to connect to WiFi.

2) If the indicator light of the smart switch is not flashing red light, please press the button of the smart switch and keep it for more than 5 seconds until the red light flashes continuously, then open the APP and connect to the WiFi according to the manual.

Scan the QR-code of the manual or Search ‘ Smart Life ’ to download and install the device's APP



Support learning code EV1527

How to match smart switch with 433Mhz RF remote control?
This Smart Switch only can link WIFI Then can match RF 433Mhz Remote Control.
This smart switch has 3 working modes to match the 433Mhz RF remote:
(smart switch, hereinafter referred to as: receiver)
About receiver's Working Mode: 
1.Momentary Mode: Press the Remote control button, the receiver's relay is ON; release button, the receiver's relay is OFF.(This working mode is not suitable for lighting, it is mainly used for special scenes)
2.Toggle Mode: Press Remote control button for 1 time, the receiver's relay is ON; press button again, the receiver's relay is OFF.
3.Latched Mode: Press Remote control button A, the receiver's relay is ON, Press the transmitter's button B, the receiver's relay is OFF.
Reset Function: After push the receiver's learning button 8 times, the receiver Clear all the remote control data in its memory.
When the red LED flashes for a few times, it indicates that the clear function is completed.
(After cleared the code in the receiver, all the remote control cannot work with the receiver.)
Matching Method:
1. Setting Momentary Mode:
Press the receiver's Learning button 1 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully.
2. Setting Toggle Mode (Common Working Mode):
Press the receiver's Learning button 2 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully.
3. Setting Latched Mode:
(Note: When you choose "Latched Mode", you need to setting two different buttons on the Remote control, the first time learn is for “ON”, the second time learn for “OFF”.
For example: button A = ON, button B = OFF).
Press the receiver's Learning button 3 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's A button, the receiver's red LED will flash and then remains lit; Then press the remote's B button, the receiver's red LED will flash then come off, Setting successfully.
Note:
A Smart Switch can only store 12 buttons (on the remote). Saved button number of more than 12, it will cause all of the stored remote control cannot control the Smart Switch. You need reboot the power and reset the RF remote control settings (press the Smart Switch's matching button 8 times).
O&A
1.My device has added successfully but stays “Offline”?
Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the led status:
Led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong Wi-Fi password or your device is too far away from the router, which causes a weak Wi-Fi signal. The device cannot be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.
2. Why the APP can't find the device in pairing status?
Answers: That's because of your phone's cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.
3.The led keeps off, even if the device is powered on. Press the button but the device does not work.
Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer's expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.





View full details